Story County Iowa Scones
There is a foodway path from the English Civil War (1642–1651) to the culinary traditions from Puritan diaspora to the American Midwest. Along with it home traditions of moral discipline and frugality that persist and is reflected in the relative… pic.twitter.com/eqBQhecHHL
Also widely known as “Will Ye Go, Lassie, Go?” or “Purple Heather”) is a beloved folk song with roots in both Scottish and Irish traditions. It’s a romantic invitation to wander the hills and pick wild mountain thyme (a fragrant herb also called wild thyme or “purple heather” in some versions), symbolizing love and the beauty of nature.
Historian Richard Miniter interprets America’s cultural and political foundations as stemming from four distinct English religious utopias—coercive visions of ideal societies—brought by settlers during the colonial era, rooted in the ideological divides of the English Civil War (Puritans vs. Royalists/Cavaliers).
Puritans (Roundheads) from East Anglia landed in New England (e.g., Massachusetts). They viewed liberty as the freedom to impose moral virtue and godly order on society, creating tightly regulated communities focused on communal piety and moral enforcement.
Cavaliers (Royalists/Anglicans) from southwest England settled in Virginia and the South. They emphasized hierarchical order, aristocratic values, and loyalty to established authority, building plantation-based societies with Anglican traditions.
Quakers and other dissenters (often from the West Midlands) arrived in the Middle States (e.g., Pennsylvania, New York, Delaware). They promoted religious tolerance, pacifism, and egalitarian ideals in diverse, pluralistic colonies.
Borderers/Scots-Irish Presbyterians from the English-Scottish borderlands first landed in the backcountry regions of the Appalachian frontier; thereafter migrating deeper into the new territories of the Ozark Mountains Missouri. They brought a rugged, clan-based, individualistic ethos with Calvinist influences, valuing personal honor and resistance to centralized control.
These four groups’ competing visions—of imposed virtue, hierarchy, tolerance, and frontier independence—created enduring regional tensions that still shape modern American society, politics, and debates over freedom and governance. This view enlightens understanding of why the United States remains in one piece; however tenuous.
The modern Democratic Party traces its cultural and ideological roots to the Roundheads from the English Civil War. These were the ideological, intolerant, legalistic faction that sought to impose moral virtue and godly order on society, often through coercive means like censorship and value-shaping institutions (e.g., schools, colleges and government programs fortified by battalions of lawyers ).
Miniter links this to contemporary Democrats’ emphasis on identity politics, political correctness (which he calls a form of class warfare), and paternalistic efforts to mold citizens’ views—through regulation and ownership of legacy and electronic media.
In contrast, he sees Republicans drawing more from Cavalier (hierarchical, traditional) and Borderer (individualistic, anti-authority) traditions which conflict with the Leftist Immersion of United States public higher education of which most international students are hardly aware.
For the entirety of March, and until April 9th, we focus on preparing response to proposed changes to the IEEE 2028 National Electrical Safety Code, and to prepare fresh new ideas for the 2029 NFPA National Electrical Code (where we have had tenure on technical committees since 1999 on behalf of the second largest building construction market in the United States).
Content normally scheduled for this time of year (which traditionally tracks the cultural calendar of educational settlements everywhere) will be accessible but our daily online meetings will start with work on those two standards. To join the “code-writing and vote-getting” use the login credentials at the upper right of our home page.
The National Electrical Safety Code is normally revised on a 5-year cycle to incorporate industry and technological changes while ensuring safety for utility workers and the public.
The COVID-19 pandemic disrupted this schedule by delaying meetings, subcommittee reviews, public input processes, and collaboration due to lockdowns, remote work challenges, and resource strains.
As a result, the typical cycle extended to six years for the 2023 edition (from the 2017 edition), which was published in August 2022 and became effective February 1, 2023.
This adjustment allowed necessary time to complete revisions safely and thoroughly amid pandemic constraints.
— National Institute of Standards and Technology (@NIST) March 14, 2026
Risk has always been a part of human society in general and the business world in particular. Standards to create a common language and approach to enterprise risk management aim to minimize those risks. https://t.co/R6acA2tLtx#riskmanagementpic.twitter.com/79c4FtI9mC
— ASTM Student Fans (@ASTMStudentFans) March 2, 2026
Acoustics matter more than we think—and Erik Miller-Klein wants us to listen up. In this video Erik highlights that 39% of building occupants say poor acoustics hurt their ability to work. Yet, less than 10% of U.S. projects involve acoustical designers. Erik challenges us to… pic.twitter.com/Bej3bIg7jx
Last week, the USPTO welcomed our U.K. partners to America’s Innovation Agency and participated in the U.S. – U.K. IP Working Group at the Chamber of Commerce—a bi-annual, industry-led forum hosted with the BritishAmerican Business. pic.twitter.com/dwDD3MlC6t
3.4 billion people. No plumbing. No electricity. Less than $0.05 per person per day.
That’s the scale—and the solution—behind ISO 30500, an international standard for non-sewered sanitation systems developed through global collaboration, led by ANSI and @AssociationAsn.
In honor of NIST’s 125th anniversary this year, anonymous donors commissioned a musical piece from composer @AlexCapMX to honor NIST and its contributions to science.
— National Institute of Standards and Technology (@NIST) March 4, 2026
📣 NSAI is seeking new members for our standards committees
We are establishing new technical committees on Light Gauge Steel, Mass Engineered Timber, and the National Annex for Eurocode 5 (structural fire design).
Dearest gentle reader… 💐 A bit of legal tea: “BRIDGERTON” is a federally registered trademark, protecting the name and entertainment services behind @Netflix’s hit series, so audiences know the true source of the romance, rivalry, and scandal. pic.twitter.com/xdy04zoxPu
Calling all artists! @DeptVetAffairs and the Veterans Day National Committee are now accepting submissions for the 2026 Veterans Day Poster Contest, with the winning design shared at VA facilities across the country. pic.twitter.com/nZBRqD0hkB
America’s research influence is eroding as China rapidly gains ground.
Per @Clarivate, the share of Highly Cited Researchers based in the U.S. has fallen from 53% to 37% since 2014, while China’s share rose significantly.https://t.co/4r5DWvWyQ5
At a recent USPTO Hour, America’ Branding Agency dives into how name, image, likeness (NIL) connects with branding and trademarks – on the field, off the field, and everywhere between.
Scientists have designed experiments to show that atomic clocks tick faster when moving and slower in stronger gravity. Now, a generation of precise clocks is allowing physicists to push such measurements to new extremes.
— National Institute of Standards and Technology (@NIST) February 25, 2026
This #NationalEngineersWeek, we celebrate the innovators transforming ideas into reality. We are proud to support the next generation of leaders through research funding, student scholarships, & industry innovation.
What’s your big idea?
Submit to #ASCE2027’s Call for Content – OPEN NOW through March 4, 2026 – for an opportunity to share it during the new flagship event for infrastructure professionals: https://t.co/wF0bm1HprT. pic.twitter.com/XM2OTGQHBJ
We’re throwing it back this month to our longest-selling SRM: limestone! Developed in 1910, this material was originally used by the construction industry to assess the components of its building materials. And its purpose hasn’t changed much since then. pic.twitter.com/MB5CtY4CCi
— National Institute of Standards and Technology (@NIST) February 23, 2026
From walkable skate-shoes to more comfortable fits, stronger curved blades, and balance-driven designs, patents have been sharpening ice skates for more than a century. ⛸️ pic.twitter.com/ITzdKfqanY
A person dines out ~3 times/month and orders take-out ~4.5 times/month. To assure that we can safely enjoy our meals from a commercial kitchen, NSF/ANSI 4-2025 provides #FoodProtection and #Sanitation requirements for commercial food equipment. @NSF_Intlhttps://t.co/5JkDMgWwIm
Vad är en standard? Syftet med standarder är att skapa enhetliga och transparenta rutiner som vi kan enas kring. Det ligger ju i allas intresse att höja kvaliteten, undvika missförstånd och slippa uppfinna hjulet på nytt varje gång. https://t.co/zKhgPXPdpWpic.twitter.com/oKejdKSm47
— Svenska institutet för standarder, SIS (@svenskstandard) July 15, 2019
Roses are red,
Violets are blue,
You’re like a standard reference material,
Reliable and true. pic.twitter.com/ensl7oc2iG
— National Institute of Standards and Technology (@NIST) February 14, 2026
From Lupercalia to love letters 💌 Valentine’s Day has evolved over centuries. Today, standards assure that the chocolates, cards, and flowers we exchange are safe, reliable, and responsibly produced. #ValentinesDay#ConsumerSafety❤️🌹🍫 https://t.co/r7KMB0eUPt
As fans tune in to the #WinterOlympics, a reminder that inventions like U.S. Pat. 5,784,809 improved snowboard boot flexibility and comfort, while U.S. Pat, 6,523,851 enabled touring bindings for uphill climbs and downhill runs, helping athletes shred with confidence. 🏂 pic.twitter.com/4TLDVbjvoc
Following an industry-wide job task analysis, the Healthcare Facility Design Professional (HFDP) Certification exam content outline will be updated starting March 1.
Apply by Feb. 28 to receive a 50% discount and sit for the HFDP exam March 1 – 31.
Following an industry-wide job task analysis, the Healthcare Facility Design Professional (HFDP) Certification exam content outline will be updated starting March 1.
Apply by Feb. 28 to receive a 50% discount and sit for the HFDP exam March 1 – 31.
Hut-hut-hike! 🏈 The NFL logo, Vince Lombardi Trophy design, and the terms “Super Bowl” and “Super Sunday” are all federally registered trademarks that help tell fans who’s bringing them “The Big Game.” pic.twitter.com/gJDxdqqm7J
The newly revised ANSI/ISEA Z87.1-2025 sets the benchmark for occupational and educational #Eye and #Face protection. 🥽 The 2025 edition provides clearer guidance on performance, testing, and marking, which helps organizations select the right protection for specific hazards and… pic.twitter.com/tkMa03s4bO
— National Institute of Standards and Technology (@NIST) February 6, 2026
The newly revised ANSI/ISEA Z87.1-2025 sets the benchmark for occupational and educational #Eye and #Face protection. 🥽 The 2025 edition provides clearer guidance on performance, testing, and marking, which helps organizations select the right protection for specific hazards and… pic.twitter.com/tkMa03s4bO
APPA members kept the collaborative learning going at this year’s offered courses:💡 Institute for Facilities Management, 🎒 Leadership Academy, and 💻 T3. pic.twitter.com/g8SzfMfQFH
— APPA – Leadership in Educational Facilities (@APPA_facilities) February 5, 2026
SAE Scholarships are dedicated to developing the future engineering workforce. Apply today for one (or more!) of the many scholarships we offer. Applications will be accepted all of February. Don’t delay! https://t.co/lv8eD79Ib8pic.twitter.com/M9Ge7ZLC1w
First invented by television producer Tony Verna in 1963, instant replay technology helps ensure fans see the biggest moments of the big game. Although he did not receive one for instant replay, Verna sought patents for similar inventions later in life. pic.twitter.com/hR7LwRXSI4
Last week, CEN and CENELEC took part in Open Source Week, engaging with the vibrant and diverse open source ecosystem. Our colleagues Amirifar Nooshin and Yannis Chourmouziadis participated in the Open Source Policy Summit where they had constructive discussions.#TrustStandardspic.twitter.com/MxwGDFzvZ1
ASHRAE is honored to welcome and host so many esteemed VIP guests at the Leadership Luncheon. This group truly represents ASHRAE’s continued commitment to collaboration with organizations throughout the built environment.#MyASHRAEpic.twitter.com/DCl8QIiS28
Winter storms are on the way; #Corrosion is a major concern. From bridges, and utility equipment, winter’s salty conditions can hasten #Rust & degradation. ASTM B117-26 helps evaluate materials meant to withstand harsh, corrosive environments. @ASTMIntlhttps://t.co/qAzr3TTMXR
ASHRAE announces nominees for the 2026-27 Slate of Officers and Directors. Members will vote on the nominees via electronic ballot in May, including who will serve as ASHRAE President for the 2026-27 Society year. To see the full list of nominees, visit https://t.co/lJdqfCz264.… pic.twitter.com/UJnF0nC2bY
Preservation of old standards may be useful. In converting material into an ASTM standard, form, style, terminology are areas that require particular attention. Here, we address the rationale for offering these versions of standards, steps taken to make them conform to ASTM… pic.twitter.com/ZT1LWgxqLX
I scream. You scream. We all scream for ICE CREAM CONES.🍦On this day in 1924, Carl R. Taylor patented an ice cream cone rolling machine (No. 1,481,813), automating the process of shaping flat wafers into perfectly formed cones. pic.twitter.com/adaBY2f3xV
🗣️ “AI chatbots with hallucinate around 27% of the time, so we need to ensure employees have the AI literacy required to critically consider the output AI delivers” Laura Bishop PhD, BSI AI and Cybersecurity Sector Lead#BSI#TrustInAI#AIGovernance#AIStrategpic.twitter.com/0MyIpozyiR
Great turnout at the X12 standing Meeting. Especially, given the difficult weather across the country. A wonderful spread of food, as well. Great to see everyone and certainly appreciate the participation. pic.twitter.com/XlbODYcY40
Congrats to Scott Osborn, PE, retired professor, biological and agricultural engineering, University of Arkansas, for being named an ASABE Fellow! Osborn was selected for in teaching the next generation of engineers, invention and innovation in systems. https://t.co/UFTWhIrS2ipic.twitter.com/Q95ufpymMI
The 2026 ASHRAE HVAC&R Student Paper Competition concluded on January 22nd with presentations from four finalists. The four-person judging panel selected Felix Ekuful as the winner of the 2026 competition. His research focus is on developing advanced control strategies to improve… pic.twitter.com/RDbLiLopIK
NSAI has launched the public consultation for S.R. 66:2015 +A1:202X Standard Recommendation providing guidance to wastewater treatment products in conformance with the EN 12566 series of standards.
Just about every airspeed sensor in the United States can trace its calibration back, either directly or indirectly via calibration laboratories, to a wind tunnel on NIST’s Gaithersburg, Maryland, campus.
🤝Full house for the biannual Technical Body Officers Seminar focusing on key aspects of the standardization system, this day was again a valuable opportunity to exchange experiences and best practices with peers, strengthening our collective technical leadership. #TrustStandardspic.twitter.com/K2wujDboS7
If you design or operate health care facilities, Standard 170 sets the minimum.
ANSI/ASHRAE/ASHE Standard 170 defines the minimum ventilation requirements for health care facilities and is developed in partnership with FGI and ASHE for adoption by code-enforcing agencies.
Starting 2026 we will organize our weekly syllabi in a less structured but in a more time sensitive manner. Stay tuned.
100 years ago, the Supreme Court made it clear in Pierce v. Society of Sisters: raising children is the responsibility of parents, not the government.
100 years later, the Trump Administration remains committed to protecting parental rights. pic.twitter.com/yduXdLShty
— Secretary Linda McMahon (@EDSecMcMahon) June 1, 2025
“…O chestnut tree;, great rooted blossomer, Are you the leaf, the blossom or the bold? O body swayed to music, O brightening glance, How can we know the dancer from the dance?”
We sweep through the world’s three major time zones; updating our understanding of the literature at the technical foundation of education community safety and sustainability in those time zones 24 times per day. We generally eschew “over-coding” web pages to sustain speed, revision cadence and richness of content as peak priority. We do not provide a search facility because of copyrights of publishers and time sensitivity of almost everything we do.
Our daily colloquia are typically doing sessions; with non-USA titles receiving priority until 16:00 UTC and all other titles thereafter. We assume policy objectives are established (Safer-Simpler-Lower-Cost, Longer-Lasting). Because we necessarily get into the weeds, and because much of the content is time-sensitive and copyright protected, we usually schedule a separate time slot to hammer on technical specifics so that our response to consultations are meaningful and contribute to the goals of the standards developing organization and to the goals of stewards of education community real assets — typically the largest real asset owned by any US state and about 50 percent of its annual budget.
1. Leviathan. We track noteworthy legislative proposals in the United States 118th Congress. Not many deal specifically with education community real assets since the relevant legislation is already under administrative control of various Executive Branch Departments such as the Department of Education.
We do not advocate in legislative activity at any level. We respond to public consultations but there it ends.
We track federal legislative action because it provides a stroboscopic view of the moment — the “national conversation”– in communities that are simultaneously a business and a culture. Even though more than 90 percent of such proposals are at the mercy of the party leadership the process does enlighten the strengths and weakness of a governance system run entirely through the counties on the periphery of Washington D.C. It is impossible to solve technical problems in facilities without sensitivity to the zietgeist that has accelerated in education communities everywhere.
Michigan Great Lake Quilt
Michigan can 100% water and feed itself. Agriculture is its second-largest industry.
A wrongful death suit filed November 3, 2025 against FirstEnergy Corporation. Allegation: Improper maintenance and inspection of power infrastructure led to the son’s fatal electrocution near State College, Pennsylvania. It is a relatively new filing so s full public docket appears not available at this time. We include it in today’s agenda as we prepare our comments on the First Draft of the 2028 National Electrical Safety Code.
This title sets the standard of care for construction, operation and maintenance of power and telecommunication infrastructure on the supply side of the point of common coupling. It is the first title to contemplate when weather disasters happen; with most public utilities bound to its best practice assertions by statute. Pre-print of Change Proposals for changes to appear in 2028 Edition will be available by 1 July 2025; with 24 March 2026 as the close date for comments on proposed changes.
The standard of care for electrical safety at high and low voltage is set by both the NEC and the NESC. There are gaps, however (or, at best “gray areas”) — the result of two technical cultures: utility power culture and building fire safety culture. There is also tradition. Local system conditions and local adaptation of regulations vary. Where there is a gap; the more rigorous requirement should govern safety of the public and workers.
The 2023 National Electrical Safety Code (NESC)– an IEEE title often mistaken for NFPA’s National Electrical Code (NEC) — was released for public use about six months ago; its normal 5-year revision cycle interrupted by the circumstances of the pandemic. Compared with the copy cost of the NEC, the NESC is pricey, though appropriate for its target market — the electric utility industry. Because the 2023 revision has not been effectively “field tested” almost all of the available support literature is, effectively, “sell sheets” for pay-for seminars and written by authors presenting themselves as experts for the battalions of litigators supporting the US utility industry. Without the ability to sell the NESC to prospective “insiders” the NESC would not likely be commercial prospect for IEEE. As the lawsuits and violations and conformance interests make their mark in the fullness of time; we shall see the 2023 NESC “at work”.
Change Proposals are now being accepted from the public for revisions to the 2023 Edition of the National Electrical Safety Code® #NESC through 15 May 2024.
The new code goes into effect 1 February 2023, but is now available for access on IEEE Xplore! Produced exclusively by IEEE, the National Electrical Safety Code (NESC) specifies best practices for the safety of electric supply and communication utility systems at both public and private utilities. The bibliography is expanding rapidly:
The IEEE NESC technical committee has released a “fast track” review of proposed changes to fault-managed power system best practice:
CP5605 Provides a definition of new Fault Managed Power System (FMPS) circuits used for the powering of
communications equipment clearly defines what constitutes a FMPS circuit for the purposes of application of the NESC
Rules of 224 and 344 https://ieee-sa.imeetcentral.com/p/eAAAAAAASPXtAAAAADhMnPs
CP5606 Provides new definitions of Communication Lines to help ensure that Fault Managed Power Systems (FMPS)
circuits used for the exclusive powering of communications equipment are clearly identified as communications lines
and makes an explicit connection to Rule 224B where the applicable rules for such powering circuits are found. https://ieee-sa.imeetcentral.com/p/eAAAAAAASPXpAAAAAFfvWIs
CP5607 The addition of this exception permits cables containing Fault Managed Power System (FMPS) circuits used for
the exclusive powering of communications equipment to be installed without a shield. https://ieee-sa.imeetcentral.com/p/eAAAAAAASPXuAAAAAEEt3p4
CP5608 The addition of this exception permits cables containing Fault Managed Power System (FMPS) circuits used for
the exclusive powering of communications equipment to be installed without a shield. https://ieee-sa.imeetcentral.com/p/eAAAAAAASPXvAAAAAGrzyeI
We refer them to the IEEE Education & Healthcare Facilities Committee for further action, if any.
August 5, 2022
We collaborate closely with the IEEE Education & Healthcare Facilities Committee (IEEE E&H) to negotiate the standard of care for power security on the #SmartCampus since many campus power systems are larger than publicly regulated utilities. Even when they are smaller, the guidance in building the premise wiring system — whether the premise is within a building, outside the building (in which the entire geography of the campus footprint is the premise), is inspired by IEEE Standards Association administrated technical committees.
Northeast Community College | Norfolk, Nebraska
Today we begin a list of noteworthy changes to be understood in the next few Power colloquia. See our CALENDAR for the next online meeting.
New rules 190 through 195 cover photovoltaic generating stations. Rule 116c adds an exception for short lengths of insulated power cables and short-circuit protection if the situation involves fewer than 1,000 volts.
Rule 320B has been revised to clarify separations that apply to communications and supply in different conduit systems.
Table 410-4 is based on the latest arc flash testing on live-front transformers.
Rule 092A adds an exception allowing protection, control, and safety battery systems to not be grounded.
Rules 234 B1, C1, D1 were revised to better present vertical and horizontal wind clearances, and to coordinate requirements with the new Table 234-7.
Rule 120A was revised to provide correction factors for clearances on higher elevations.
Table 253-1 has been revised to reduce the load factor for fiber-reinforced polymer components under wire tension—including dead ends—for Grade C construction.
Rule 410A now requires a specific radio-frequency safety program for employees who might be exposed.
In the Clearances section, as well as in the specification of the Grade of Construction in Table 242-1, the Code further clarifies the use of non-hazardous fiber optic cables as telecom providers continue to expand their networks.
Revisions in the Strength & Loading sections include modified Rule 250C, which addresses extreme wind loading for overhead lines. Two wind maps are now provided instead of the previous single one. A map for Grade B, the highest grade of construction, with a Mean Recurrence Interval (MRI) of 100 years (corresponding to a one percent annual probability of occurrence) is provided in place of the previous 50–90-year MRI map. For Grade C construction, a separate 50-year MRI (two percent annual probability of occurrence) map is now provided. In the previous Code, a factor was applied to the 50–90-year MRI map for application to Grade C.
Changes were also made to the method of determining the corresponding wind loads, consistent with the latest engineering practices as an example of a Code revision focused on public safety, the ground end of all anchor guys adjacent to regularly traveled pedestrian thoroughfares, such as sidewalks, and similar places where people can be found must include a substantial and conspicuous marker to help prevent accidents. The previous Code did not require the marking of every such anchor guy.
Significant revisions were made in Section 14 covering batteries. Previous editions of the code were based on lead-acid technology and batteries only used for backup power. The 2023 Code incorporates the new battery technologies and addresses energy storage and backup power.
A new Section 19 of the code covers photovoltaic generating stations, with sections addressing general codes, location, grounding configurations, vegetation management, DC overcurrent protection, and DC conductors. These new rules accommodate large-scale solar power projects.
In the Clearances section, all rules for wireless antenna structures have been consolidated in the equipment section (Rule 238 and 239), which makes the Code more user-friendly.
A new subcommittee was created focusing on generating stations, with the original subcommittee continuing to address substations.
A working group is investigating Fault Managed Power Systems (FMPS) cables as the technology may be used for 5G networks. The team is looking at possible impacts, including clearances and work rules.
Several proposals recommending improvements to the 2017 National Electrical Safety Code (NESC) were submitted to the IEEE subcommittees drafting the 2022 revision of the NESC. Some of the proposals deal with coordination with the National Electrical Code — which is now in its 2023 revision cycle. Keep in mind that that NESC is revised every 5 years at the moment; the NEC is revised every 3 years.
The original University of Michigan standards advocacy enterprise has been active in writing the NESC since the 2012 edition and set up a workspace for use by electrical professionals in the education industry. We will be using this workspace as the 2022 NESC continues along its developmental path:
The NESC is a standing item on the 4-times monthly teleconferences of the IEEE Education & Healthcare Facilities committee. The next online meeting is shown on the top menu of the IEEE E&H website:
We have a copy of the first draft of the 2023 NESC and welcome anyone to join us for an online examination during any of Power & ICT teleconferences. See our CALENDAR for the next online meeting.
Business unit leaders, facility managers and electrical engineers working in the education facilities industry may be interested in the campus power system reliability database. Forced outages on large research campuses, for example, can have enterprise interruption cost of $100,000 to $1,000,000 per minute. The campus power system forced outage database discriminates between forced outages attributed to public utility interruptions and forced outages attributed to the university-owned power system. The E&H committee will convey some of the discipline applied by the IEEE 1366 technical committee into its study of campus power systems and, ultimately, setting a benchmark for the standard of care for large university power systems.
* The IEEE changed the nominal date of the next edition; likely owed to pandemic-related slowdown typical for most standards developing organizations.
Issue: [16-67]
Contact: Mike Anthony, Robert G. Arno, Lorne Clark, Nehad El-Sharif, Jim Harvey, Kane Howard, Joe Weber, Guiseppe Parise, Jim Murphy
Category: Electrical, Energy Conservation & Management, Occupational Safety
The 2023 National Electrical Safety Code (#NESC) will be published this August. Stay tuned for new resources from #IEEE coming soon! Read about the upcoming changes here:https://t.co/VLXCNaf74S
— IEEE Educational Activities (@IEEEeducation) June 8, 2022
Mike Anthony is ID Number 469 | Proposal period closes 11:59 PM US Pacific Time | May 15
Meeting Notes in red
Loss of electric power and internet service happens more frequently and poses at least an equal — if not greater threat — to public safety. So why does neither the National Electrical Code or the National Electrical Safety Code integrate reliability into their core requirements? Reliability requirements appear in a network of related documents, either referenced, or incorporated by reference; sometimes automatically, sometimes not.
NESC Main Committee Membership: Page xii
Apart from the IEEE as the accredited standards developer, there are no “pure non-government user-interests” on this committee; although ANSI’s Essential Requirements for balance of interests provides highly nuanced interpretation. The Classifications on Page xiii represents due diligence on meeting balance of interest requirements.
In our case, we are one of many large universities that usually own district energy plants that both generate and purchase generate electric power (as sometimes provide var support to utilities when necessary; as during the August 2003 North American outage). For University of Michigan, for example, has about 20 service points at 4.8 – 120 kV. Its Central Power Plant is the largest cogeneration plant on the DTE system.
Contents: Page xxviii | PDF Page 29
Absence of internet service is at least as much a hazard, and more frequent, than downed wires. Is there a standards solution? Consideration of interoperability of internet service power supported on utility poles should track in the next revision.
No mention of any reliability related IEEE reliability standards in the present edition. Why is this?
Section 2: Definitions of Special Terms| PDF Page 46
In the 2023 Handbook, the term “reliability” shows up 34 times.
availability (from Bob Arno’s IEEE 3006-series and IEEE 493 Gold Book revision)
reliability (Bob Arno)
utility (PDF Page 57)
communication | PDF Page 47
list of terms defined in the 2023 National Electrical Code that are new and relevant to this revision: (Article 100 NEC)
municipal broadband network, digital subscriber line, surveillance cameras
wireless communication system
010. Purpose | PDF Page 40
Looks like improvement since last edition. Suggest explicit Informational Note, as in the NEC, using “reliability” and referring to other agencies. “Abnormal events” could be tighter and refer to other standards for abnormal, steady-state events. The clarification of purpose is welcomed although a great deal remains uncovered by other best practice literature; though that can be repaired in this edition.
Legacy of shared circuit path standards. Should provisions be made for municipal surveillance, traffic and vehicle control infrastructure. What would that look like?
011. Scope | Covered PDF Page 40
3. Utility facilities and functions of utilities that either (a) generate energy by conversion from some other form of energy such as, but not limited to, fossil fuel, chemical, electrochemical, nuclear, solar, mechanical, wind or hydraulic or communication signals, or accept energy or communication signals from another entity, or (b) provide that energy or communication signals through a delivery point to another entity.
5. Utility facilities and functions on the line side of the service point supplied by underground or overhead conductors maintained and/or installed under exclusive control of utilities located on public or private property in accordance with legally established easements or rights-of-way, contracts, other agreements (written or by conditions of service), or as authorized by a regulating or controlling body. NOTE: Agreements to locate utility facilities on property may be required where easements are either (a) not obtainable (such as locating utility facilities on existing rights-of-way of railroads or other entities, military bases, federal lands, Native American reservations, lands controlled by a port authority, or other governmental agency), or (b) not necessary (such as locating facilities necessary for requested service to a site).
012. General Rules | Covered PDF Page 42
For all particulars not specified, but within the scope of these rules, as stated in Rule 011A, design, construction, operation, and maintenance should be done in accordance with accepted good practice for the given local conditions known at the time by those responsible for the communication or supply lines and equipment
General purpose clause could use some work since no definition of “accepted good practice”. Refer to IEEE bibliography.
Section 2: Definition of special terms | PDF Page 46
Recommendations elsewhere should track here.
The word “installation” appears 256 times and is generally understood in context by experts. Suggest borrow from NEC to clarify our concern for including co-linear/communication circuits.
conduit. exclusive control, lines, photovoltaic, NEC interactive. qualified
Section 3: Reference
NFPA 70®, National Electrical Code® (NEC®). [Rules 011B4 NOTE, 099C NOTE 1, and 127
IEEE Std 4™-1995, IEEE Standard Techniques for High-Voltage Testing. [Table 410-2 and Table 410-3]
IEEE Std 516™-2009, IEEE Guide for Maintenance Methods on Energized Power-Lines. [Rules 441A4
NOTE 2, 446B1, and 446D3 NOTE, and Table 441-5, Footnote 4]
IEEE Std 1427™-2006, IEEE Guide for Recommended Electrical Clearances and Insulation Levels in
Air-Insulated Electrical Power Substations. [Rule 124A1 NOTE, Table 124-1, 176 NOTE, and 177 NOTE]
IEEE Std 1584™-2002, IEEE Guide for Performing Arc Flash Hazard Calculations. [Table 410-1,
Footnotes 1, 3, 6, and 14]
IEEE Std C62.82.1™-2010, IEEE Standard for Insulation Coordination—Definitions, Principles, and Rules.
[Table 124-1 Footnote 5]
Add references to Gold Book, 1386, etc. IEC since multinationals conform.
Safety Rules for the Installation and Maintenance of Overhead Electric Supply and Communication Line | PDF Page 111
Has anyone confirmed that these tables match NEC Table 495.24 lately? If it helps: there were no meaningful changes in the 2023 NEC in Article 495, the high voltage article
Section 11. Protective arrangements in electric supply stations | PDF Page 77
A safety sign shall be displayed on or beside the door or gate at each entrance. For fenced or walled electric supply stations without roofs, a safety sign shall be displayed on each exterior side of the fenced or wall enclosure. Where the station is entirely enclosed by walls and roof, a safety sign is required only at ground level entrances. Where entrance is gained through sequential doors, the safety sign should be located at the inner door position. (A clarification but no change. See Standards Michigan 2017 proposals)
Recommend that all oil-filled cans be removed and services upgraded through energy regulations with new kVA ratings
Section 12: Installation and maintenance of equipment
093. Grounding conductor and means of connection
Fences The grounding conductor for fences required to be effectively grounded by other parts of this Code shall meet the requirements of Rule 093C5 or shall be steel wire not smaller than Stl WG No. 5.
D. Guarding and protection | PDF Page 67
124. Guarding live parts| PDF Page 85
Propose roofs required for exterior installations
Part 2. Safety Rules for the Installation and Maintenance of Overhead Electric Supply and Communication Line | Page 72
Section 22. Relations between various classes of lines and equipment | Page 80
222. Joint use of structures | Page 82
Where the practice of joint use is mutually agreed upon by the affected utilities, facilities shall be subject to the appropriate grade of construction specified in Section 24. Joint use of structures should be
considered for circuits along highways, roads, streets, and alleys. The choice between joint use of structures and separate lines shall be determined through cooperative consideration with other joint
users of all the factors involved, including the character of circuits, worker safety, the total number and weight of conductors, tree conditions, number and location of branches and service drops, structure
conflicts, availability of right-of-way, etc.
Reliability considerations for sustaining internet service when power supply is absent.
Par2 Section 20 Safety Rules for the Installation and Maintenance of Overhead Electric Supply and Communication Line | PDF Page 111
Has anyone confirmed that these tables match NEC Table 495.24 lately?
Part 3. Safety Rules for the Installation and Maintenance of Underground Electric Supply and Communication Lines | Page 220
Renewable energy for internet access
311. Installation and maintenance
A. Persons responsible for underground facilities shall be able to indicate the location of their facilities.
B. Reasonable advance notice should be given to owners or operators of other proximate facilities that
may be adversely affected by new construction or changes in existing facilities.
C. For emergency installations, supply and communication cables may be laid directly on grade if the
cables do not unreasonably obstruct pedestrian or vehicular traffic and either:
1. The cables are covered, enclosed, or otherwise protected, or
2. The locations of the cables are conspicuous.
Supply cables operating above 600 V shall meet either Rule 230C or 350B.
NOTE: See Rules 014B2 and 230A2d.
Part 4. Work Rules for the Operation of Electric Supply and Communications Lines and Equipment | PDF Page 289
When and why was the term “Work” added to the title of this section?
Core text for the definition of wireless communication system reliability
Appendix E Bibliography| PDF Page 355
Index | PDF Page 398
The word “reliability” appears only three times. Should it track in the NESC or should it track in individual state requirements. So neither the NEC nor the NESC couples closely with power and communication reliability; despite the enormity and speed of research.
We examine the proposals for the 2028 National Electrical Safety Code; including our own. The 2026 National Electrical Code where sit on CMP-15 overseeing health care facility electrical issues should be released any day now. We have one proposal on the agenda of the International Code Council’s Group B Committee Action Hearings in Cleveland in October. Balloting on the next IEEE Gold Book on reliability should begin.
FERC Open Meetings | (Note that these ~60 minute sessions meet Sunshine Act requirements. Our interest lies one or two levels deeper into the technicals underlying the administrivia)
Department of Electrical Engineering, National Taiwan University of Science and Technology, Taipei City, Taiwan
First Draft Proposals contain most of our proposals — and most new (original) content. We will keep the transcripts linked below but will migrate them to a new page starting 2025:
N.B. We are in the process of migrating electric power system research to the Institute of Electrical and Electronics Engineers bibliographic format.
Recap of the May meetings of the Industrial & Commercial Power Systems Conference in Las Vegas. The conference ended the day before the beginning of the 3-day Memorial Day weekend in the United States so we’re pressed for time; given all that happened.
We can use our last meeting’s agenda to refresh the status of the issues.
We typically break down our discussion into the topics listed below:
Codes & Standards:
While IAS/I&CPS has directed votes on the NEC; Mike is the only I&CPS member who is actually submitting proposals and responses to codes and standards developers to the more dominant SDO’s — International Code Council, ASHRAE International, UL, ASTM International, IEC & ISO. Mike maintains his offer to train the next generation of “code writers and vote getters”
Performance-based building premises feeder design has been proposed for the better part of ten NEC revision cycles. The objective of these proposals is to reduce material, labor and energy waste owed to the branch and feeder sizing rules that are prescriptive in Articles 210-235. Our work in service and lighting branch circuit design has been largely successful. A great deal of building interior power chain involves feeders — the network upstream from branch circuit panels but down stream from building service panel.
Our history of advocating for developing this approach, inspired by the NFPA 101 Guide to Alternative Approaches to Life Safety, and recounted in recent proposals for installing performance-based electrical feeder design into the International Building Code, appears in the link below:
Access to this draft paper for presentation at any conference that will receive it — NFPA, ICC or IEEE (or even ASHRAE) will be available for review at the link below:
NFPA 110 Definitions of Public Utility v. Merchant Utility
NFPA 72 “Definition of Dormitory Suite” and related proposals
Buildings:
Renovation economics, Smart contracts in electrical construction. UMich leadership in aluminum wiring statements in the NEC should be used to reduce wiring costs.
This paper details primary considerations in estimating the life cycle of a campus medium voltage distribution grid. Some colleges and universities are selling their entire power grid to private companies. Mike has been following these transactions but cannot do it alone.
Variable Architecture Multi-Island Microgrids
District energy:
Generator stator winding failures and implications upon insurance premiums. David Shipp and Sergio Panetta. Mike suggests more coverage of retro-fit and lapsed life cycle technicals for insurance companies setting premiums.
Reliability:
Bob Arno’s leadership in updating the Gold Book.
Mike will expand the sample set in Table 10-35, page 293 from the <75 data points in the 1975 survey to >1000 data points. Bob will set up meeting with Peyton at US Army Corps of Engineers.
Reliability of merchant utility distribution systems remains pretty much a local matter. The 2023 Edition of the NESC shows modest improvement in the vocabulary of reliability concepts. For the 2028 Edition Mike submitted several proposals to at least reference IEEE titles in the distribution reliability domain. It seems odd (at least to Mike) that the NESC committees do not even reference IEEE technical literature such as Bob’s Gold Book which has been active for decades. Mike will continue to propose changes in other standards catalogs — such as ASTM, ASHRAE and ICC — which may be more responsive to best practice assertions. Ultimately, improvements will require state public utility commission regulations — and we support increases in tariffs so that utilities can afford these improvements.
Mike needs help from IEEE Piscataway on standard WordPress theme limitations for the data collection platform.
Mike will update the campus power outage database.
Healthcare:
Giuseppe Parise’s recent work in Italian power grid to its hospitals, given its elevated earthquake risk. Mike’s review of Giuseppe’s paper:
Mike and David Shipp will prepare a position paper for the Harvard Healthcare Management Journal on reliability advantages of impedance grounding for the larger systems.
The Internet of Bodies
Forensics:
Giuseppe’s session was noteworthy for illuminating the similarity and differences between the Italian and US legal system in handling electrotechnology issues.
Mike will restock the committee’s library of lawsuits transactions.
Ports:
Giuseppe updates on the energy and security issues of international ports. Mike limits his time in this committee even though the State of Michigan has the most fresh water international ports in the world.
A PROPOSED GUIDE FOR THE ENERGY PLAN AND ELECTRICAL INFRASTRUCTURE OF A PORT
Other:
Proposals to the 2028 National Electrical Safety Code: Accepted Best Practice, exterior switchgear guarding, scope expansion into ICC and ASHRAE catalog,
Apparently both the Dot Standards and the Color Books will continue parallel development. Only the Gold Book is being updated; led by Bob Arno. Mike admitted confusion but reminded everyone that any references to IEEE best practice literature in the NFPA catalog, was installed Mike himself (who would like some backup help)
Mike assured Christel Hunter (General Cable) that his proposals for reducing the 180 VA per-outlet requirements, and the performance-base design allowance for building interior feeders do not violate the results of the Neher-McGrath calculation used for conductor sizing. All insulation and conducting material thermal limits are unaffected.
Other informal discussions centered on the rising cost of copper wiring and the implications for the global electrotechnical transformation involving the build out of quantum computing and autonomous vehicles. Few expressed optimism that government ambitions for the same could be met in any practical way.
Are students avoiding use of Chat GPT for energy conservation reasons? Mike will be breaking out this topic for a dedicated standards inquiry session:
Here we shift our perspective 120 degrees to understand the point of view of the Producer interest in the American national standards system (See ANSI Essential Requirements). The title of this post draws from the location of US and European headquarters. We list proposals by a successful electrical manufacturer for discussion during today’s colloquium:
2026 National Electrical Code
CMP-1: short circuit current ratings, connections with copper cladded aluminum conductors, maintenance to be provided by OEM, field markings
CMP-2: reconditioned equipment, receptacles in accessory buildings, GFCI & AFCI protection, outlet placement generally, outlets for outdoor HVAC equipment(1)
(1) Here we would argue that if a pad mount HVAC unit needs service with tools that need AC power once every 5-10 years then the dedicated branch circuit is not needed. Many campuses have on-site, full-time staff that can service outdoor pad mounted HVAC equipment without needing a nearby outlet. One crew — two electricians — will run about $2500 per day to do anything on campus.
CMP-3: No proposals
CMP-4: solar voltaic systems (1)
(1) Seems reasonable – spillover outdoor night time lighting effect upon solar panel charging should be identified.
CMP-5: Administrative changes only
CMP-6: No proposals
CMP-7: Distinction between “repair” and “servicing”
CMP-10: Short circuit ratings, service disconnect, disconnect for meters, transformer secondary conductor, secondary conductor taps, surge protective devices, disconnecting means generally, spliced and tap conductors, more metering safety, 1200 ampere threshold for arc reduction technology, reconditioned surge equipment shall not be permitted, switchboard short circuit ratings
New update alert! The 2022 update to the Trademark Assignment Dataset is now available online. Find 1.29 million trademark assignments, involving 2.28 million unique trademark properties issued by the USPTO between March 1952 and January 2023: https://t.co/njrDAbSpwBpic.twitter.com/GkAXrHoQ9T
_-_Benjamin_Franklin_Drawing_Electricity_from_the_Sky_-_Google_Art_Project.jpg)
